This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Variometer for Paraglider Pilots
Consumer electronics
Embedded hardware development
Firmware development
Sports equipment
Wearable
A variometer is a device used by paraglider pilots at competitions. It informs the pilot of the rate of descent or climb. A variometer records data such as speed, altitude, and climb rate, and can send this data over Bluetooth or USB to a smartphone, a tablet, or an e-reader.
Request
One of the leading Swiss companies that produce products for paraglider pilots turned to Integra Sources to enhance their existing variometer.
Solution
We provided PCB design and ported the existing firmware from Arduino to the new hardware. The project is based on STM32F4 microcontroller. It runs on RTOS (Real Time Operating System) and uses the FatFS filesystem module to store data on the SD Card. We enhanced the algorithm for calculating the final results, taking into consideration the new hardware and the device’s physical characteristics.
Scope of work
- Schematics design
- PCB design
- Generation files for the manufacturer
- Hardware testing
- Debugging
- Firmware development
Technologies Used
- STM32F4 series MCU with Cortex-M4 core was used in this project.
- FreeRTOS was used for firmware development.
- The firmware was implemented using C/C++.
- Eclipse IDE with GCC and OpenOCD was used for firmware implementation.
- SD-Card was used to store tracking data.
- EAGLE CAD IDE was used for Schematics and PCB design.
- For precision positioning, GPS, accelerometer, and gyroscope were used.
Result
The result of our work is a new version of the variometer. A paraglider pilot uses it during flights to ascertain that the correct flight level is being maintained. The variometer indicates the climb/sink rate using beeping tones without any time lag. It has a set of sensors including accelerometer, gyroscope, temperature, GPS, and barometer. It informs the pilot about altitude changes, tracks their position via GPS and stores detailed data about the flight on an SD card.
When the flight is over, the pilot can transfer the data using Bluetooth to their smartphone, tablet, or laptop. They can also analyze these data using special software. The data format we used for saving flight data is compatible with data formats used by software applications.
The variometer has a built-in solar cell but the battery can also be charged over the micro USB cable. It will run for 20 hours with a fully charged battery.
Pilots can also use the variometer as an IGC (International Gliding Commission) logger.
Battery life
20 hours
Average refresh rate
10 Hz
Measurement precision
90%
You might also like...
Customizable GPS Tracking Platform for Monitoring Assets
The tracker records the location and condition of assets and transfers the data to a server via Bluetooth, Wi-Fi, or GSM at defined time intervals. 
LEARN MORE 
Drone Autopilot
The hardware unit based on the Atmel AVR XMEGA microcontroller provides remote control of the drone and autonomous flight performance.
LEARN MORE