1. Home
  2. /
  3. Services
  4. /
  5. Electronic Design Services
Integra Sources home button.

GET IN TOUCH
Two monitors with a PCB layout and programming code on them.

Electronic Design Services

Do you need a custom electronics design? Our team will study your idea, design and manufacture a printed circuit board, create embedded software, and test the prototype. We will also help you launch mass production. Qualified hardware and software engineers with years of experience.

What we do

We provide a complete cycle of electronic design services, from requirements gathering and component selection to prototyping and testing. The team can create both small embedded solutions based on a single 32-bit microcontroller and sophisticated systems running 64-bit processors. We make digital and analog electronics, automation devices, multisensor IoT network systems, power management systems, and FPGA-based systems. Integra offers consumer-grade, commercial, industrial, and medical device development, as well as building solutions for education, transportation, agriculture, and other industries.
A printed circuit board and its components. A printed circuit board and its components.

What’s included

A PCB lying on a table and connected to measuring equipment through wires.

Full-Cycle Development

We will lead you through the entire process of electronic product development. The team will start with consultation, research and development (R&D), and proof of concept (POC) to check the feasibility of your project. Then, the Integra engineering team will create a PCB and embedded software, test them, fix bugs, and prepare all the documentation required to launch mass production.
A PCB held between fingers.

Embedded Electronics Design Service

Integra creates embedded hardware of varying complexity based on different microcontrollers, SoCs, and single-board computers. We’re experienced with the Arm Cortex-M, Cortex-R, Cortex-A, AVR, and PIC microcontrollers. We also work with 32- and 64-bit microprocessors from Nordic Semiconductor, Texas Instruments, STMicroelectronics, and other manufacturers. As an electronics design company, we can offer qualified advice and realistic project estimations.
Learn more
A PCB connected to a computer.

Embedded Software Development

Custom electronic device development implies creating embedded software for it as well. The Integra team specializes in C/C++ development and works with real-time operating systems (FreeRTOS, Zephyr, ThreadX, RTEMS, LiteOS, and NuttX) and ROS. If necessary, we will also develop application-level software for your product.
Learn more
A computer monitor with a 3D model of a PCB on the screen.

PCB Design & Layout

Our engineers can create printed circuit boards from scratch or help you finish your own development. We will gather requirements, select components, design PCB schematics and layout, and create a prototype. If required, we will also help you find a manufacturer. The team uses professional tools such as Altium Designer, Cadence Allegro, Eagle Cad, OrCad, and KiCad.
Learn more
Three PCBs lying on a table.

Electronic Prototyping Services

Within our electronics engineering services, we always create one of several prototypes. This step allows the team to improve the board’s performance, reveal faults, and fix them. As a professional electronic design firm, we use virtual simulations, development kits, and full-scale PCBs to test concepts and technologies.
Programming an FPGA.

FPGA Development

Unlike application-specific integrated circuits, Field-Programmable Gate Arrays (FPGA) can be programmed and reprogrammed after manufacturing. They are used in consumer electronics, telecommunications, data centers, and robotics. Simpler solutions can be created based on complex programmable logic devices (CPLD). The Integra team has in-depth knowledge of Hardware Description Languages (HDL) and FPGA development tools. So we can offer architecture development, FPGA design and testing, and IP core configuration.
Learn more
PCBs for power electronics.

Power Electronics Design

We can design a range of solutions to manage, process, store, or convert electric power. Power electronic device development includes both hardware and firmware creation for battery management systems, power chargers, power supplies, motor controllers, pulse generators, and other power electronic systems. We are experienced with MOSFET, IGBT, GaN, and other types of transistors and can make both low-voltage and high-voltage solutions.
Learn more
Integra Sources CEO is talking to a customer.

Have an idea?

SUBMIT A PROJECT

Our projects

Check Integra’s previous projects delivered within our electronic design services.
Details of the medical alert bracelet.

Medical Alert Bracelet That Delivers Assistance at the Touch of a Button

A bracelet designed for patients at military hospitals and clinics in the USA. It notifies hospital staff about an emergency with the patient.
  • Embedded hardware development
  • Embedded software development
  • Firmware development
  • Healthcare
  • IoT
  • Wearable
A device for tracking beacons.

People and Asset Tracking Device to Ensure Safety in the Mining Industry

We created a special gateway device that processes wireless signals from Bluetooth beacons for locating and tracking people in underground mines.
  • Beacons
  • Embedded hardware development
  • Embedded software development
  • Industrial solutions
  • IoT
  • Logistics and asset tracking
  • Wearable
A full spectrum LED learning system attaches to the neck of the guitar, turning it into a display and showing exactly where to put your fingers.

Fret Zealot, a Guitar Accessory with LEDs for Guitar Learning and Jams

Fret Zealot is an LED strip with colorful flashing lights attached to the guitar neck. It shows where to put your fingers to play a certain chord.
  • Consumer electronics
  • Education
  • Embedded hardware development
  • Entertainment
A system for downloading videos and playlists from the server and reproducing them in a certain order on several TVs simultaneously.

Video Streaming System Based on Raspberry Pi

The system was built for a US-based company that provides entertainment videos for wellness centers. The player reproduces videos in a certain order on Raspberry Pi de...
  • Custom software development
  • Entertainment
  • Raspberry Pi
  • Telecom

Awards

Three Integra Sources' specialists are discussing a project.

Why choose Integra Sources

Innovative problem-solving skills, in-depth expertise, and enthusiasm make us a strong partner for hardware and software development.
Learn More about our workflow

Integration

  • Adaptation to customers’ management systems
  • Integration into customers’ development processes

Flexibility

  • Flexibility in development
  • Flexibility in communication

Communication

  • High level of communication
  • Personal account management
  • Legal security guarantee

Transparency

  • Transparency in development processes
  • Customer’s dashboard
  • Clear timelines
CONTACT SALES TEAM

Industries

LEARN MORE ABOUT THE INDUSTRIES WE WORK WITH

Consumer Electronics

Consumer devices, wearables, smart home solutions, desktop, mobile, and web applications.

Power Electronics

BESS and BMS solutions, charging systems, electric motor controllers, power conversion.

Extractive Industry & Manufacturing

Industrial automation, industrial IoT, computer vision, tracking solutions, wearables, industrial UAVs.

Healthcare

HMIs for medical equipment, wearables, computer vision and AI-based diagnostics solutions.

Logistics & Transportation

Location and status tracking for freight and vehicles, warehouse robotics, order and warehouse management systems.

Science & Education

Measuring and testing equipment, programmable robots, e-learning solutions, curriculum management systems.

Agriculture

UAVs and autonomous robots, soil analysis and climate control systems, solutions for precision agriculture, asset tracking.

Entertainment

Multimedia solutions, video streaming systems, desktop and mobile applications, drones.

Robotics

Hardware and software, electric motor controllers, computer vision algorithms, AI solutions.

Consumer Electronics

Consumer devices, wearables, smart home solutions, desktop, mobile, and web applications.

Power Electronics

BESS and BMS solutions, charging systems, electric motor controllers, power conversion.

Extractive Industry & Manufacturing

Industrial automation, industrial IoT, computer vision, tracking solutions, wearables, industrial UAVs.

Healthcare

HMIs for medical equipment, wearables, computer vision and AI-based diagnostics solutions.

Logistics & Transportation

Location and status tracking for freight and vehicles, warehouse robotics, order and warehouse management systems.

Science & Education

Measuring and testing equipment, programmable robots, e-learning solutions, curriculum management systems.

Agriculture

UAVs and autonomous robots, soil analysis and climate control systems, solutions for precision agriculture, asset tracking.

Entertainment

Multimedia solutions, video streaming systems, desktop and mobile applications, drones.

Robotics

Hardware and software, electric motor controllers, computer vision algorithms, AI solutions.
We've worked with
enterprises
and
startups
from Europe, the USA, Australia, and Asia
DaVinci Innovation Labs logo. AVerMedia logo. The Medical Team logo. Visybl logo. GP2U logo. University of East London logo.

Our tech stack

Languages

Assembler logo. C logo. C++ logo. C# logo. Java logo. Python logo. Rust logo. Verilog logo. VHDL logo.

Cloud Platforms

ARM Mbed logo. AWS logo. Google Cloud logo. Azure logo. Particle logo.

OS

Android logo. FreeRTOS logo. Linux logo. Linux Embedded logo. Particle logo. UNIX logo. watchOS logo. Wear OS logo. Windows logo. Windows CE logo. Zephyr logo.

Processor Architectures

ARM 7/9/11, AVR, Cortex M0/M3/M4/A8/A7/A9, PIC, RISC-V, x86/x86-64 MIPS, MSP430.

IDE

Clion logo. Code Composer Studio logo. Crossworks logo. Cube IDE logo. Eclipse logo. IAR Systems logo. Intel Quartus Prime logo. Keil logo. Microchip Studio logo. TrueSTUDIO logo. Visual Studio logo. Vivado logo.

ECAD Software

Altium Designer logo. Eagle logo. Cadence Design Systems logo. OrCAD logo. KiCAD logo. P-CAD logo.

Interfaces

CF/MMC/SD, DVI, Ethernet, HDMI, I2S, LAN, LCD, LPC, PCI, PCI-E, SATA, USB, SPI, RS-232, RS-485, CAN, I2C, UART, MIPI, DSI, MODBUS.

Wireless Technologies

3G logo. 4G logo. BLE logo. Bluetooth logo. NB-IoT logo. NFC logo. LTE-M logo. LoRaWAN logo. LoWPAN logo. RFID logo. Thread logo. Wi-Fi logo. Zigbee logo.

Math and Simulation Tools

MATLAB Simulink logo. GNU Octave Scilab logo.

Vendors

Testing and certification

Integra’s services include thorough testing, debugging, and pre-certification steps. Our experts carefully review the certification requirements applied to the product and stick to them at all development stages. We provide all the necessary documentation for further electronics certification and software audits.
DISCUSS A PROJECT
FCC mark.
ISO mark.
RoHS mark.
UL mark.
DISCUSS A PROJECT
Show more

Explore our workflow

GO TO HOW WE WORK PAGE
1

We get acquainted with the concept of the future solution and sign a non-disclosure agreement. The team gathers project requirements, studies relevant documents, and analyzes rival products on the market. At this phase, a preliminary project evaluation is made.

2

We contact the customer to confirm the project requirements. Then we create a technical specification and set a budget and deadlines.

3

We make the final evaluation of the project, make up a team, and schedule its workload.

4

We sign a contract for electronic device development. The team gets to work.

5

We select components, design schematics and PCB layouts, and create one or more prototypes. The team identifies and eliminates bugs, and optimizes the performance of the devices. Customers receive daily reports on the progress. If necessary, the plan can be amended.

6

In parallel with hardware development or right after that, the team starts creating the necessary software. Depending on the project requirements, we create firmware, embedded software, applications, or server software.

7

The team tests all the functions of the device and software. We check their performance under corresponding operating conditions and run some tests required for product certification. If necessary, the product is then modified.

8

After the tests, we finalize the documentation necessary for mass manufacturing, including the bill of materials, Gerber files, etc. We can also prepare manuals if the product is designed for in-house use.

9

When the development process is finished, customers can enjoy a free warranty period. During this time, the team will fix any bugs and defects in the product.

Reviews

"Integra Sources' extensive preparation beforehand helped give confidence to the client that they chose the right partner. Despite the time difference, they are able to stay in constant communication. Integra's dedication to the project has led the client to develop an ongoing relationship."
Christophe Baudia
CEO at GeoMoby
"The database has satisfied all scope requirements. The upgrades have improved communication and performance. Team strengths include accessibility and problem-solving and they are unafraid to research problems and develop their own solutions. Integra demonstrated strong management skills when they managed our servers for a week during an important trade show; we showcased our product at the event. Communication channels are always fluid and straightforward."
Eduardo Ruiz
Founder & CEO at Ruiz Aerospace Manufacturing
"Integra's team helped us clarify our requirements and change systems architecture to achieve the final goal. I'd say that the flexibility and enthusiasm of both engineering and management teams throughout the whole project were some of the things we value most in our collaboration."
Dr. Sam Wass
University of East London
Show more

Frequently Asked Questions

Read this information to better understand our electronic design services.

What do I get when the project is finished?

Upon project completion, the customer receives a fully functional device, a prototype or software, detailed technical documentation, source codes, and PCB design files in a CAD format. The customer will receive all the necessary instructions on how to use the product. We will also answer any questions and provide training if necessary.

Do you do receipt inspections of the components you receive?

Yes, we carefully select materials and components, trying to find a balance between their quality and price with consideration to the project requirements. All materials we use comply with the EN, IPC, and RoHS international standards. If required, we will use components that comply with the national regulations of your country.

What about intellectual property rights?

The cession of intellectual property rights is legislated in our contracts. We also sign a non-disclosure agreement to protect any sensitive information. We will mention your project on our website and other platforms only with your permission.

My device needs CE and FCC certification. Can you help me comply with it?

Yes, we definitely can. As an electronics design company with years of experience, we take into account certification requirements including FCC, CE, UL, and other types. We follow all the necessary design standards to get your product well-prepared for certification. For example, we can select only pre-certified modules and components for your hardware.

What wireless technologies do you work with?

We have worked with the most popular wireless network technologies such as:

  • Bluetooth and Wi-Fi;
  • low-power network protocols (BLE, ZigBee, Thread, LoRa); and
  • cellular networks (GPRS, 3G, 4G LTE, NB-IoT, LTE CatM).

Can you design a flexible PCB?

Yes, we can. The team can make both rigid flexible and flat flexible circuits. A flexible board can become a reliable and cost-effective solution for your hardware. It is both lightweight and saves lots of space.

Do you have partnerships with MCU manufacturers?

Yes, we do. Integra is on the list of electronic design firms chosen as authorized partners of MCU manufacturers, such as Microchip, STMicroelectronics, and Infineon. However, we can use any electronic component according to your requirements, irrespective of the manufacturer.

How do you verify your hardware design?

Our hardware verification process consists of several stages and implies different testing methods. For example, we use electrical rule checking (ERC) to test the schematic’s design and apply design rule checking (DRC) to verify the layout. We employ electronic circuit simulators to verify the schematic and PCB signal integrity. As soon as the PCB is developed, our engineer builds a 3D model of the assembled PCB to check it against a 3D model of the enclosure to make sure the board fits well. During the PCB design, we arrange test points to control voltage and signal waveforms. We provide this data to the manufacturer to conduct an electrical test. If requested by the customer, for example, in the case of mass production, we develop testing software for automatic or semi-automatic testing of each PCB at the manufacturing site.

What is your expertise in analog electronics?

Within analog electronics development, we build analog filters, codecs, measuring amplifiers, and current sources.

For which applications do you build electronics?

We build consumer electronics, medical devices, tracking solutions, drones, robots, and electronics for industrial applications, retail, telecommunications, and other industries.

What is the minimum completion time?

The timing of a project largely depends on its specifics, complexity, scale, choice of components, and logistics. For example, a project audit can take 1-2 months, while AI-based software development usually lasts much longer. We always set realistic deadlines when preparing the spec and stick to the schedule at all project stages.

What electronics laboratory equipment do you use?

Lab equipment is a must-have for circuit design companies. Depending on the type of service provided, we use various testing equipment and tools, such as a laboratory power supply, an oscilloscope, a signal generator, a logic analyzer, and different types of multimeters.

Can you guarantee the quality of the product?

We pay great attention to the quality of our work. The customer receives a fully functional device or software and a detailed user manual. After finishing the project, we provide a free warranty period, during which the team will eliminate any discovered defects and bugs. During the post-warranty period, we can also provide advice on possible modernization and modification of your product.

Can you help me with enclosure design?

Integra Sources has long-lasting and successful relationships with trusted enclosure designers. We will provide consultation and help you place an order. If necessary, we can make minor modifications on-site. During the development process, we keep in touch with the industrial design studio to ensure that the enclosure and the board match each other.

Who are your customers?

We develop projects for private enterprises and public organizations: small, medium, and large businesses, mining and manufacturing enterprises, startups, healthcare organizations, and enterprises engaged in other industries.

We cooperate
with the whole world

See case
See case
See case
See case
See case
See case
See case
See case